WHP Wireless WHP-1100 - Manual (Page 33)

disabled, and the access point will then refuse all connection attempts from that
station. Clear the Not Use box to let the selected method of access control take effect
on this station.
MAC Address List:
Status Disables or enables an individual entry
Address The MAC address of a wireless station
Identification Identification for the wireless station
Config Window – Encryption Panel
Click the Encryption tab (Figure 16) to set up the security options.
Figure 16. Config window — Encryption panel
The default setting is WEP disabled and initially the key sections are blank.
The pull-down Method box lists four options:
• WEP: Disable, Authentication: Open – Disable data encryption
• WEP: Enable, Authentication: Open – Enable data encryption and use Open
System authentication (wireless clients’ requests to join the network must not be
Outdoor Access Point 27