WHP Wireless WHP-1100 - Manual (Page 30)

From the Filter panel, some, all, or none of the protocols listed may be selected for
filtering out:
• IP Protocol
• IPX Protocol
• NetBEUI Protocol
• AppleTalk Protocol
• Other Protocols
• Internet Multicast Frames
Config Window – Wireless Panel
The Wireless panel (Figure 14) provides access to the Wireless settings.
Figure 14. Config window — Wireless panel
These settings are explained in the following table.
Name
Assigns the Outdoor AP a unique name that allows
the AP to be easily identified on the network.
SSID
Identifies the wireless LAN domain that this AP is in.
A domain is generally composed of wireless APs you
are most likely to communicate with. You can type an
24 Outdoor Access Point