Vivitek DVR5612 - Manual (Page 4)

Important Statement
Replacement method of projection lamp
Projection lamps are supplies and have life span. Please contact the resellers when the image turns dark or
color gets deteriorated. When this happens, please replace it with a new projection lamp. If the projection
lamp could not light up and have noise, the possible reasons are:
1.The life span for the projection lamp are ended or
2.Shutting down the TV right after the turn-on of power. At the moment, the temperature
of projection lamp is too high and does not cool down to certain degree. Turn it on
after a few minutes and it will work properly. or
3.The projection lamp does not connect correctly with the lamp cradle.
Replacement Procedure
Beware of the high temperature when
replace the projection lamp.
Warning:
Eye damage may result from Directly viewing the light
produced by the lamp used in this apparatus. Always turn
off lamp before opening this cover.
.Loose the screw
on lamp cover
Caution: After taking the projection lamp out, do not place any metal substance into the lamp
cradle. Do not touch the lamp cradle or it’s easy to get burned or cause fire.
Caution: Do not touch the glass surface of the new projection lamp because it possibly will
affect the quality of resolution and decrease the life span of the projection lamp.
Caution: Make sure to screw the screws firmly in order to prevent the shaking of the lamp,
which will result in poor connection.
Caution: Put the discarded used projection lamp in the packaging box of the new projection
lamp and handle it with case and compliant to local regulation. Please do not have
kids to access the discarded lamps to prevent any danger.
Lamp
2.Then loose the
screw on lamp
.Pull out the lamp directly
4.Then put the new lamp into this unit. (Follow
the reverse the way you took it out.)
1