Vivitek DVR5612 - Manual (Page 23)

22
♦ Stretch
An image fully fills the screen.
♦ Dot by Dot
Detects the resolution of the signal and displays an
image with the same number of pixels on the screen.
Notes:
* Wide Format is not available when using the POP, SPLIT functions.
* When you use 720p or 1080i signal input source. The screen will
always keep STRETCH mode.
9. DEFAULT
Use ◄ ►to select ON or OFF.
ON Mean call the factury default setting for Picture
Adjust.
OFF Keep your picture adjust setting.
10.H POSITION
Use ◄ ►to change image Horizontal position.
11.V POSITION
Use ◄ ►to change image Vertical position.
12.AUTO CONFIG
Press ok to auto get the input signal again.
13.ADC CLOCK
Use◄ ►to change the clock value
Adjusting the image interference. When the screen
shows interference caused by disturbing wave, please
adjust the clock.
14.ADC PHASE
Adjusting Phase distortion of image in PC mode.When
the screen shows flashing, ghost image or undulation,
please adjust the phase.
8
How to use OSD