Vivitek DVR5612 - Manual (Page 3)

2
Maintenance
Clear methods
For the reason of safety, please make sure to unplug the power cord before start to do the cleaning.
Cleaning for the case
■ To mop the outside of the case with soft and clean cloth. Follow the instruction if use
any cloth containing certain chemical materials.
■ Do not use alcohol or other material inflammable, which will result in the decay of
the case or paint fading.
■ Do not use robber or other clue-related material to interface with the case. It possibly
will leave scar on the case.
Cleaning for the monitor
■ Please clean up the dust on the surface of the monitor with soft cloth or other similar
material and then clean the monitor with dry and soft cloth again.
■ It’s prone to get scratch on the surface of the monitor so do not rub or knock the
surface with hard material. Also, do not use any diluted detergent to scrape or clean
the monitor.
Maintenance for filter
Please do not leave the machine without filter installed or the have a dirty filter owing to lack of periodically
cleanup. It’s because the filter is to prevent the dust or other objects from going into the internal of the
machine. And keep the machine in a good ventilation condition. It will result in the rise of temperature in the
machine and even cause a fire or damage if the filter with dust does not be replaced for a long period of time.
The filters are supplies and please contact the resellers for details if you need to replace the filter.
Please contact the reseller for information about replacement or cleanup of
the filter within 1 year. The outgoing or incoming vent hole should be cleaned
periodically.
Method to replace the filter
Filter
Step 3. Put the filter cover back and Screw
the filter on the back of the machine
Step : Loose this tow
Screw on the filter cover
Step 2 : Take out the used
filter and put new filters on
4 slots
Filter
Slot
Important Statement
1