Viking AF/AR - Manual (Page 24)

48 47
Turn on water supply and check for leaks. Lift unit off rollers to desired height and level unit using
a 5/16” head wrench.
Note: DO NOT use an electric device. Overtightening
can cause damage.
Attach positive secure self-tapping bolts to 2x4
using a 22” extension.
Verify that drain pan is installed and aligned.
Align holes on both ends of louvered panels and insert
screws.
Using a Phillips screwdriver, attach the
kickplate to the unit and adjust to desired height.
14 15
Wall
2 x 4
Refrigerator
Screw
16 17
1
2
18
2
1
3
19
Kickplate Installation
3
1
2
20
1
2
21
110˚
120˚
90˚
Open refrigerator door so door stop and shoulder
screw are accessible.
Note: Shoulder screw should be in 110˚ door opening position.
Remove shoulder screw and place in 90° or
120° position.
Door Stop Adjustment
Replace top air grille. Using an 8”magnetic nut driver, replace
the two 1/4” screws.
(Professional) Replace the center grille louver. (Designer) Replace the center grille louver.
22 23
24a 24b
Final Installation