Step 3: connect the power supply, Onnect, Ower – Visioneer Patriot 780 User Manual
Page 22: Upply
S
TEP
3: C
ONNECT
THE
P
OWER
S
UPPLY
15
S
TEP
3: C
ONNECT
THE
P
OWER
S
UPPLY
Connect the power supply and power cord, and plug the power supply
into an electrical outlet.
To connect your Visioneer Patriot 780 scanner:
1. Plug the power supply into the power port on the scanner.
2. Plug the power cord into the power supply then into a wall outlet.
Now proceed to the next section, “Step 4: Connect the USB Cable
and Turn on the Power.”
Note: Only use the power supply [model number: 077-242090-I3
(YC-1050CAN1352PR)] included with your scanner. Connecting any
other type of power supply may damage your scanner, and will void its
warranty.