Vivitar DIGITAL VIDEO RECORDER DVR 943HDv2 User Manual
Page 27
27
To exit the reset:
If you would like to exit the format, select „No‟ and press the OK button on the joystick.
You will automatically exit the menu and return to the previous mode.
Note: Selecting the system Language is required after resetting to the Factory settings. After you
have RESET to the Factory Default Settings, and you immediately continue using the
digital video camera, the language will be set to the default: English.
To change the system Language:
- Press the MENU button to open the menus.
- Press the joystick button LEFT or RIGHT to scroll and select the Language Menu.
- Press the joystick button UP or DOWN to select the language you would like.
- Press the OK button on the joystick to save the selection.
If you have not selected a system Language (after the RESETTING to the Factory settings)
and the digital video camera is turned off, the next time the digital video camera is powered
on, you will be prompted to select a system Language.