Powering on/off your digital video camera – Vivitar VIVICAM 620HD User Manual
Page 11
10
Powering ON/OFF Your Digital Video Camera
Make sure the batteries have been inserted properly into your digital video camera.
If your camera comes with a rechargeable lithium battery, make sure it is fully charged before
the first use.
Make sure an SD card has been inserted properly into your camera.
(SD card up to 16GB - SD Card not included)
Powering the camera ON
Press the
Power button to turn your camera ON.
The camera will be in Video Capture mode to start.
Powering the camera OFF
While the camera is on, you can press the
Power button again at any point to turn your
camera OFF. You will see a “Goodbye” splash screen and then the camera will power off
completely.
Note: When there is insufficient battery power, a
“Low Battery” message will appear on the LCD
screen. The camcorder will automatically power off a few moments later.
Auto Power OFF
– Power Saving
Your digital video camera also has an Auto Power Off feature that will automatically turn off your
camera after a specific period of time that your camera is left idle. The Auto Power Off settings
can be set from the Auto Power Off settings menu (in either Photo Capture Mode or Video
Capture Mode).