Vision Fitness t9700hrt - Manual (Page 12)

8
ALL MODELS
POWER
Ensure that your Treadmill is
properly connected to a power
outlet, then turn on the Power
switch, located at the front of the
main frame.
EMERGENCY STOP
If at any time you need to stop the
Treadmill quickly, simply press the
red Emergency Stop button. This
will instantly cut all power and the
Treadmill will come to a stop. To
resume your workout, you will
need to re-enter any data.
SAFETY MAGNET
Your VISION FITNESS Treadmill
will not start unless the Safety
Magnet is inserted into the circle in
the console overlay. You should
attach the clip end to your cloth-
ing. If at any time you need to
stop the Treadmill quickly simply
pull the Safety Magnet off the
console. This will cut all power to
the Treadmill and it will come to a
complete stop. To resume your
workout, place the Safety Magnet
back in place. This will send you
back to the start-up mode.