Tr oubleshooting – Vision Fitness X6000DA User Manual

Page 40

Text mode
Original mode

tr oubleshooting

TROUBLESHOOTING YOUR ELLIPTICAL TRAINER

Our Elliptical Trainers are designed to be reliable and easy to use. If,
however, you have a problem, these troubleshooting steps may indicate
the cause.

PROBLEM: The Console does not light up (Model X6000DA only).
SOLUTION: Batteries are too weak; replace them.

PROBLEM: The Elliptical Trainer appears to work but there is no
resistance change.
SOLUTION: The magnetic brake assembly is not working properly;
please contact your retailer.

PROBLEM: The Elliptical Trainer makes a squeaking or creaking noise.
SOLUTION (All models): Check and tighten all the bolts on the Elliptical
Trainer again.
SOLUTION (Dual-Action models only): Lubricate the bushings in the
Dual-Action link arms.

NOTE:

If the above steps do not remedy the problem, discontinue use,

turn the power off and contact your retailer.

A L L M O D E L S