Vision Fitness X6000DA - Manual (Page 15)

11
STEP 3: One Pedal Arm will now be lower than the other. Simultaneously
lift both the lowest Pedal Arm and the Guide Rail upon which it is resting
to the vertical position (A). The lock pin protruding from the Guide Rail
should now be aligned with the lock receiving mechanism on the
underside of the Pedal Arm. Firmly push the Guide Rail until it clicks and
locks into position (B). Check that it is secure before proceeding.
Repeat these steps with the other Pedal Arm and Guide Rail to
completely fold your Elliptical Trainer for compact storage.
NOTE: (See Illustration 4) On Dual-Action Elliptical trainers, the higher
Pedal Arm (C) will have the lower Dual-Action Handlebar behind the
Pedal Arm, and the Upper Dual-action Handlebar forward of the
Console Mast (D).
folding A L L M O D E L S