Vinotemp WINE-MATE VINO-2500SSW User Manual
Page 17
- 16 -
Fig. 4 WM-150~250SCU Condensing Unit
Fig. 5 Liquid Filter Fig.6 Liquid Indicator
2. Evaporator Unit Installation
1) The WM15~25SFCW evaporator units shall be installed for wall mount with
the air supply on the top and air return on the bottom.
2) Air supply shall be unobstructed minimum 12” for a direct blow installation;
leave 2” clearance for a deflector installation; air return shall be unobstructed
minimum 6”.
3) A grille can be used to cover the supply and return with 0~2” clearance; or 2-3
ft long duct can be added.
4) There is a gravity drain system used, so the unit shall be installed level or with
a slight slope downward the drain connection and the drain line shall be
installed slope down toward the drain. If rise-up is needed, a condensation
pump must be used.
3. Condensing Unit Installation