Mnp 10 commands (continued), W-class commands, Caller id commands – Viking 56K User Manual

Page 37

VIKING COMPONENTS 56K EXTERNAL MODEM USER’S GUIDE

MNP 10 Commands (Continued)

Command

Function

@M0

Select initial transmit level of -26 dBm.

@M1

Select initial transmit level of -30 dBm.

@M2

Select initial transmit level of -10 dBm.

@M3 - @M10

Select initial transmit level of -10 dBm.

@M11

Select initial transmit level of -11 dBm.

@M12

Select initial transmit level of -12 dBm.

@M30

Select initial transmit level of -30 dBm.

:E0

Disable the compromise equalizer.

:E1

Enable the compromise equalizer.

W-Class Commands

Command

Function

Display list of permanently blacklisted numbers.

Display list of delayed numbers.

*NCn

Change country to one of eight NVRAM.

Caller ID Commands

Command

Function

#CID=0

Disable Caller ID.

#CID=1

Enable Caller ID with formatted presentation.

#CID=2

Enable Caller ID with unformatted presentation.

Chapter 6