Varec 4532 - Manual (Page 56)

Maintenance Average Temperature/Water Bottom Sensor and Converter
46 Installation and Operations Manual
9.4 Replacement
After a complete 4532 ATC electronic module has been replaced, the parameters must
be manually re-entered to the replaced new module in order to maintain the proper
operation. Measurement can continue without having to carry out a new setup.
The following matrix parameters should be confirmed after replacement of the
electronics.
GVH Contents
443 Level Data Selection
460-469 Element Position No. 1-9
470 (to select elements 10-15)
474 (to adjust position of element selected at GVH=470)
482 Total No. elements
485 Kind of Interval
486 Bottom point
487 Element Interval (If GVH=485 is "Equal")