beautypg.com

Faqs / troubleshooting, Visual and audio indicators explained – VXI BlueParrott TalkPro B1000-GTX User Manual

Page 12

background image

23

22

FAQS / TROUBLESHOOTING

Why does the computer have trouble hearing me?

1. Check microphone placement (page 16).
2. Adjust microphone volume settings on your computer.

Procedure to test for microphone transmit and audio output (Windows)

1.Select Start/Settings/Control Panel/Multimedia and verify that USB Audio Device
is selected as Preferred Device for Playback and is selected as Preferred Device for
Recording.
2. Check “Use only Preferred Devices.”
3. Click OK to close Windows Audio Properties.
4. Select Start/Programs/Accessories/Entertainment/Sound Recorder. Activate
headset (page 17) and then click on the red dot to begin recording.
5. Speak into the headset microphone for about 10 seconds. You should see vari-
ations in the green wavelength meter.
6. Click on the square to stop recording.
7. Click on the triangle in the center to play back your recording. You should hear
your voice from the receiver.
8. You have successfully installed your B1000-GTX Headset.
9. For Internet Telephony Applications, it is highly recommended that you rerun
the AudioSetup Wizard for the VoIP provider.
10. For speech applications, verify that USB Audio Device is selected as input/out-
put source.

VISUAL AND AUDIO INDICATORS EXPLAINED

Headset Indicator Lights / While In Base:

No lights

Headset not receiving charge

Bright green light

Fully charged/Okay to use

Red light

Partially charged/okay to use

Headset Indicator Lights / While Off Base:

Yellow flashing every 4-5 seconds

In Standby Mode

Yellow flashing once per second

In Talk Time Mode

Red/yellow lights flash alternately, then red stops

Pairing successful

Headset Audio Indicators:

3 beeps that descend in tone

Headset turned off

3 beeps that ascend in tone

Headset turned on

1 single beep

Follows press of Multifunction
button when modes changed,
Indicates mute/unmute function

1 single beep that repeats every few seconds

Microphone is muted

Base Unit Indicator Lights:

Yellow flashing every 4-5 seconds

Base is on

Yellow flashing every second

Talk Time mode active

Red/yellow lights flash alternately, then red stops

Pairing successful

No lighted icons showing

Base not receiving power