VXI 201403B User Manual
Vxi headset instructions
![background image](/manuals/219707/1/background.png)
VXI HEADSET INSTRUCTIONS
WEARING THE HEADSET
1. Place the headset on your head.
2. Position the earpiece(s) directly on the ear(s).
3. Slide the headband in or out of the side support for proper fit.
4. Position the microphone about one finger's width from your lower lip with the dot on the
microphone facing your mouth.
CONNECTING THE HEADSET TO A TELEPHONE AMPLIFIER
1. Attach the quick disconnect on the headset cord to the lower coil cord (this may be already
attached to your amplifier) Be sure to match the two sides of the quick disconnect correctly
before pushing them together.
2. Plug the other end of the coil cord into the headset port on the amplifier.
If needed, consult the amplifier user guide to locate the correct port.
CONNECTING THE HEADSET DIRECTLY TO A TELEPHONE
(for headset compatible phones only)
1. Attach the quick disconnect on the headset cord to the lower coil cord. Be sure to match the
two sides of the quick disconnect correctly before pushing them together.
2. Plug the other end of the lower cord into the headset port on the telephone. Some phones
allow connection to the handset port, please consult the phone's user manual.