Vinotemp WINE-MATE VINO6500SSH - Manual (Page 5)

- 4 -
Features and Specifications
• Wine-Mate duct split cooling systems WM-2500~8500SSH are designed and
used to provide a cold temperature between 50~65 °F for a properly insulated
wine cellar.
• The wine cellar will maintain humidity range within 50~70% RH.
• These temperature and humidity ranges like in natural caves are optimized
for long term storage of wine.
• SSH units consist of a condensing unit and an evaporator unit; they are
connected by a liquid line and an insulated suction line.
• SSH condensing units can be located away from the evaporator unit 50 ft so
that noise and compressor vibration are isolated.
• SSH evaporator units are designed to provide chilled air to wine a cellar
through ducts and can be located up to 25 ft away to reduce noise. It also
provides more installation flexibility.
Fig. 1 SSH Duct Split Cooling System
NOTE:
Capacity is determined under the cellar, the cellar ambient and the
condensing unit ambient temperatures of 55°F, 75°F and 90°F, with R11
interior and R19 exterior insulations. Any higher ambient temperatures,
lower insulations will cause reducing capacity and the cellar temperature
may not be maintained at 55°F.
CAUTION:
If the installation area will be below 50°F, purchase a low ambient condition
kit.