Viper 160XVL User Manual

Page 23

■ Comfort closure is a programming option which closes the

vehicle’s windows after remote locking.

■ Parking lights flashing or constant. Your system can be pro-

grammed to either flash or to turn on the parking lights con-

stantly during the entire remote start operation.

■ Passive Mode or Active Mode. In Passive Mode the Failsafe

Starter Kill will automatically activate 30 seconds after the

ignition has been turned off.

■ Ignition switch-controlled door-locking on or off. With this

feature on, the doors will lock 3 seconds after the ignition

key is turned on, and unlock when the ignition key is turned off.

■ Passive Locking or Active Locking (doors lock only with the

transmitter). With Passive Locking, the vehicle doors lock

automatically 30 seconds after the ignition has been turned

off. Passive Locking can only be selected when the system

has been programmed for Passive Mode.

■ The horn honk confirmations for locking and unlocking can be

programmed on or off. In order for this feature to be pro-

grammed on, the horn must be connected to the system.