Vivitar DVR 518 - Manual (Page 57)

56
4. Press the OK button to save your choice.
5. Press the MENU button to close the menu and exit the Setup function.
USB
Your camcorder can be used as either a MSDC (Mass Storage device) or PC
Camera. Use this mode to select the USB option that will appear as default
every time you connect your camcorder to the PC using the USB cable.
1. Press the Up/Down button and select the USB option from the menu.
2. Press the Right button to enter the USB submenu.
3. Press the Up/Down button to highlight and select the USB option you
desire.
MSDC; PCCAM
4. Press the OK button to save your choice.
5. Press the MENU button to close the menu and exit the Setup function.
Start-up Image
You can select the picture that you like best on your camcorder to appear each
time you power on your camcorder.