Vivitar 980HD - Manual (Page 31)

31
EN
Section 6
Viewing Pictures and Movies on TV
Connecting to a High-Definition 16:9(Wide) TV
1. Connect the HDMI cable to your camera’s HDMI Out port.
2. Connect the other end of the cable to a television.
3. Set the video input source of your TV to “ HDMI.”
(16:9)
4. Use the buttons to view the stored pictures and movies on the TV.
Operation On TV
1. Press OK Button to play movies and press it again to
pause.
2. While playing movies, press Right/Left Buttons to fast
forward/rewind and then release the button to stop.
3. Use Up/Down Buttons to adjust the volume.
4. In the Picture Playback mode, use Tele Button to magnify
the picture. To navigate the magnified picture, use
Direction Buttons to navigate the magnified picture. Press
OK Button to exit the magnification mode.
Note
The LCD Panel does not display when the camera is connected to an HDTV.
Connecting to a non-high-definition 4:3 TV
1. Connect one end of the AV cable to your camera’s AV out port.
2. Connect the other end of the cable to a television.
3. Use direction button to view stored pictures and movie on a TV.
( 4 : 3 )
Note
The LCD Panel does not display when the camera is connected to a TV.