Venmar HEPA 3100* User Manual
Page 7
- 7 -
2.3 M
OUNTING AND
S
ERVICING
C
ONSIDERATIONS
•
The two following pictures are showing the minimum clearance needed to open the door completely.
22.5” 15.75”
(572 mm) (400 mm)
VD0117
VD0116
22”
(559 mm)
NOTE: A minimum of 8” (203 mm) clearance from any obstruction on top of the unit is required for the ductwork radius turn.
8”
(203 mm)
VD0118A
8 ¾”
222 mm
9 ¾”
248 mm
• The joist opening needed to install the Tandem® tansition (included in
both installation kits) must be 9 ¾” (248 mm) minimum. Also, the maximum
height of the Tandem transition is 8 ¾” (222 mm). See Tandem transition
end view beside.
2.2 HEPA 3100, HF 3.1
AND
HEPA 4100 U
NITS
FRONT VIEW
TOP VIEW
2.1 HRV 2600
AND
HR 2.6 U
NITS
FRONT VIEW
TOP VIEW
17.8''
(452 mm)
30.2''
(767 mm)
22.9'' (581 mm)
VK0049A