Vivitar 690HD - Manual (Page 7)

6
Initial Camera Setup
Charging the Battery Installing the Memory Card

To Charge the Battery:
1. Power off the camera.
2. Connect the camera with the USB cable
to the AC Charger or to the computer (as
shown above).
3. Allow the battery to charge for at least 3
hours before using the first time.
4. The charge light will turn off when the
battery is fully charged.
Turning On the Camera Using the Camera
Selecting
the modes Accessing
the menu

SD Memory card
(up to 32GB) needed for normal use.

SDHC Class 4 (or higher)
recommended.