Vivitar 690HD User Manual
Page 22
21
Frequency Menu
The options in the Frequency menu represent the frequency of the electrical current in fluorescent
lighting sources
in your locale. If your camera is set to a frequency that does not match your country‟s
electric current, you may see flickering or waves on the images taken by your camera.
50Hz
– UK, Europe and Australia
60Hz
– US, Canada and South America
1) Press the MENU button to open the menus for the current mode.
2) Push the direction button LEFT or RIGHT to scroll and select the Frequency menu.
3) Push the direction button UP or DOWN to highlight the desired menu selection.
4) Press the OK button to confirm and select the highlighted menu option.
5) A
selected option icon will appear on the selected item.
6) Push the direction button LEFT or RIGHT to select the next menu item.
7) Press the MENU button to exit the menu and return to your previous mode.
8) Remember that this setting will be remembered by your camera until you manually change the
setting or restore the camera‟s default factory settings.
Format Memory Card/Format SD Menu
You can use the Format Memory Card menu to delete all of the content that is currently on your
camera‟s memory card.
Keep in mind that formatting the memory card will permanently delete all of the content on
your camera
‟s memory card.
This option will delete all of the content at one time. If you would like to delete individual images, use
the delete menu in the ca
mera‟s Playback mode or press the Delete button.
1) Press the MENU button to open the menus for the current mode.
2) Push the direction button LEFT or RIGHT to scroll and select the Format Memory Card menu.
3) Push the direction button UP or DOWN to highlight the desired menu selection.
4) To
exit without formatting the card, select „Cancel‟ and press the OK button.
5)
To proceed with the format, select “Yes” and press the OK button.
You will be asked to confirm the formatting of the memory card.
Select “No” and press the OK button to exit without formatting.