VTech IP 5825 - Manual (Page 21)

21
Basic Operation
Handset Settings
Ringer Volume
• From the idle (OFF) mode, press SEL then
or key to RINGER VOLUME.
• Press SEL again. The current ringer volume
will be shown:
• Press and keys or enter digit 0-6 to the
desired ringer volume. The current ring tone
is played and the volume bar is increased/
decreased each time the setting is adjusted.
At the lowest setting, display will show:
• The Handset will not ring when a call comes
in if Ringer Volume is setted to the lowest
setting.
• Press SEL to confirm the setting.
Ringer Tone
• From the idle (OFF) mode, press SEL then
or key to RINGER TONE.
• Press SEL. You will then be prompted to
choose INTERCOM CALL or OUTSIDE
CALL. Press
or keys to select the de-
sired option.
• Press SEL again. You can then use or
keys or enter digit 0-9 to sample the ring
tones. The screen, will show:
• Press SEL to confirm your setting.
Key Tone (preset to ON)
• From the idle (OFF) mode, press SEL then
or key to KEY TONE.
• Press SEL again. The current setting will be
shown. Press or keys to scroll to ON or
OFF. When set to ON, the Handset will emit
a beep whenever a key is pressed.
• When the desired option is shown, press
SEL to confirm your selection.