VTech IP 5825 - Manual (Page 13)

13
Basic Operation
Mute Function
• During an active call, pressing the
MUTE.DELETE key will disable the mi-
crophone. MICROPHONE MUTED will
display briefly. The screen will display:
• Press MUTE.DELETE again to return to
normal 2-way conversation. MICRO-
PHONE ON will display briefly.
Intercom Call
• From the idle (OFF) mode, press INT. The
Handset will display:
• The other Handset will ring and the
screen will display:
• Press INT or SPEAKER to answer the
intercom call. The screens will display:
• Press INT or OFF on either Handset to
end the call.
• NOTE: If the other Handset is out of range,
or on an external call, when the first hand-
set attempts to intercom it, the display of
the first handset will show:
Call Forward and Call Transfer
An external call can be forwarded or trans-
ferred from one Handset to the other Hand-
set. The difference between forward and
transfer depends on if the sending Handset
needs to talk with the receiving Handset,
before the external call is actually sent to the
other Handset.
Handset Operation