Vivitar ViviCam 3705 - Manual (Page 13)

13
GETTING STARTED
You can use 2 AA size batteries (Alkaline, Ni-MH), or an AC power adapter (optional accessory) to power the camera. Battery
power is convenient for capturing images or video clips while an AC adapter power is useful when transferring images to your
computer.
Installing Batteries
1. Make sure the camera is turned off.
2. Slide the battery/SD memory card cover in the direction of the
[OPEN] arrow.
3. Insert the batteries, noting correct polarity (+ and -).
4. Close the battery/SD memory card cover firmly.
Note:
If you will not be using the batteries for an extended period of time, remove them from the camera to prevent leakage or
corrosion.
Never use manganese batteries.
Never use batteries of different type (together) or mix old and new batteries.
Avoid using batteries in extremely cold environments as low temperatures can shorten the battery life and reduce camera
performance.
Using an AC Power Adapter
(optional accessory)
1. Make sure the camera is turned off.
2. Open the jacl cover and connect one end of the AC power
adapter to the jack labeled “DC IN”.
3. Connect the other end to an electrical outlet.