VIEWSONIC VS13191 User Manual
Page 29
ViewSonic VNB132
22
If there is an old password then setup will prompt with the following window instead and a
current password will be required to be entered at first:
Set Supervisor Password
Enter current password [ ]
Enter New Password [ ]
Confirm New Password [ ]
User can type password in field of enter new password”, and re-enter password in field of
“confirm new password “for verification.
If verification OK:
Setup Notice
Changes have been saved.
[Continue]
The supervisor password is set complete after user press enter”
If verification fails:
Setup Warning
Password does not match
Re-enter Password
[Continue]
If password on boot is required, the password must be set otherwise it cannot be enabled.
The formats of the password are as follows:
Length
No more than 8 characters.
Characters Alphanumeric keys only. The shift status i.e. Ctrl, Shift, Alt, and Capital are
ignored.