Picture, Picture mode, Contrast – VIEWSONIC CD4225 User Manual

Page 27: Brightness, Color temp, Temp adjust, Sharpness

ViewSonic CD4225

Picture

Picture Mode

• Allows you to choose from the following preset picture modes: Standard, Vivid, Cinema and User.

• Press the ENTER button on the remote control, or the Menu/Enter button on the control panel to

change selection.

Contrast

• Adjusts the image brightness in relation to the input signal.

• Press the or PLUS (+) button to increase contrast.

• Press the or MINUS (-)/Auto button to decrease contrast.

Brightness

• Adjusts the image brightness in relation to the background.

• Press the or PLUS (+) button to increase black level.

• Press the or MINUS (-)/Auto button to decrease black level.

Color Temp

• Use to choose a color temperature.

• The following options are available: 9300, 6500, 5800, sRGB and USER.

• Press the / or PLUS (+)/MINUS (-)/Auto button to change setting.

Temp Adjust

• You can use this function to set up the USER mode of Color Temp.

• The color levels of red, green, and blue are adjusted by the color bars.

• Press the /PLUS (+) or /MINUS (-)/Auto button to select Red, Green or Blue, and then press the

ENTER button on the remote control, or the Menu/Enter button on the control panel.

• Press the or PLUS (+) button to increase color level.

• Press the or MINUS (-)/Auto button to decrease color level.

Sharpness

• This function is digitally capable to keep crisp image at any timings.

• It is adjustable to get a distinct image or a soft one as you prefer and set independently for each

picture mode.

• Press the or PLUS (+) button to increase sharpness.

• Press the or MINUS (-)/Auto button to decrease sharpness.