beautypg.com

Vivotek PZ7132 User Manual

Page 45

background image

VIVOTEK

User's Manual - 45

2�

WEP (Wired Equivalent Privacy): This allows communication only with other devices with identical

WEP settings�

Authentication Mode: Choose one of the following modes� The default setting is “Open”�

Open – Communicates the key across the network�

Shared – Allows communication only with other devices with identical WEP settings�

Key length: The administrator can set the key length to 64 or 128 bits�

The default setting is “64 bits”�

Key format: Hexadecimal or ASCII. The fault setting is “HEX”.

HEX digits consist of the numbers 0~9 and the letters A-F�

ASCII is a code for representing English letters as numbers from 0-127 except “, <, > , and the space

character which are reserved�

Network Key: Enter a key in either hexadecimal or ASCII format�

You can select different key lengths, the acceptable input lengths are as follows:

64-bit key length: 10 Hex digits or 5 characters�

128-bit key length: 26 Hex digits or 13 characters�

NOTE

► When 22(“), 3C(<), or 3E(>) are input as network keys, the key format cannot be changed to ASCII

format�