Vivotek PZ7132 - Manual (Page 126)

VIVOTEK
126 - User's Manual
IP filtering
Note: This request requires administrator access privilege
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/admin/ipfilter.cgi?
method=&[start=&end=][&index=<value>]
[&return=]
PARAMETER VALUE DESCRIPTION
addallow Add a set of allow IP address range to server. Start and end
parameters must be specified. If the index parameter is
specified, it will try to add starting from index position.
adddeny Add a set of deny IP address range to server. Start and end
parameters must be specified. If the index parameter is
specified, it will try to add starting from index position.
deleteallow Remove a set of allow IP address range from server. If start
and end parameters are specified, it will try to remove the
matched IP address. If index is specified, it will try to remove
the address from given index position. [start, end] parameters
have higher priority then the [index] parameter.
Method
deletedeny Remove a set of deny IP address range from server. If start
and end parameters are specified, it will try to remove the
matched IP address. If index is specified, it will try to remove
the address from given index position. [start, end] parameters
have higher priority then the [index] parameter.
start The start IP address to add or to delete.
end The end IP address to add or to delete.
index The start position to add or to delete.
return Redirect to the page after the parameter is
assigned. The can be a full URL path or relative
path according to the current path. If you omit this parameter,
it will redirect to an empty page.