Install lens motor, Figure 3-7 . autoscope lens motor installation, 7. autoscope lens motor installation – Vidikron vision70 User Manual

Page 34: Pre l iminar y

Text mode
Original mode

Vidikron Vision 70 Series Owner’s Operating Manual

PRE

IMINAR

Install Lens Motor: Position the AutoScope Lens Motor (item #1) as shown in Figure 3-7.
Line up the mounting holes on the lens motor housing with those on the underside of the
projector. Secure the motor to the projector with the four remaining 10-32 x 1/2” Pan-Head
Phillips screws (item #2) and nylon spacers (item #5).

Figure 3-7. AutoScope Lens Motor Installation

After you have installed the AutoScope lens motor, proceed with Mounting the Vision 70 on
page 24.