VIEWSONIC CD5233 - Manual (Page 32)

ViewSonic 30 CD5233
Main-Menu
SCREEN
H POSITION
Controls Horizontal Image position within the display area of the LCD.
Press ▶ button to move screen to right.
Press ◀ button to move screen to left.
V POSITION
Controls Vertical Image position within the display area of the LCD.
Press ▶ button to move screen to UP.
Press ◀ button to move screen to DOWN.
CLOCK * : INPUT VGA only
Press ▶ button to expand the width of the image on the screen the right.
Press ◀ button to narrow the width of the image on the screen the left.
CLOCK PHASE * : INPUT VGA only
Improves focus, clarity and image stability by increasing or decreasing this setting.
ZOOM MODE
You can select “FULL”, “NORMAL” and “CUSTOM” and “REAL”. (INPUT HDMI,DVI-D,VGA only)
You can also select “FULL”,“NORMAL” “DYNAMIC” and “CUSTOM” and “REAL”. (INPUT
COMPONENT, S-VIDEO, VIDEO only)
Selecting “DYNAMIC” will make the screen display panoramic with the expansion of the middle and
outside of the screen changed. (The upper and the bottom of the image will be cut by expansion.)
Dynamic image is the same as FULL size image when HDTV signal is input.
Selecting “REAL” image will be displayed 1 by 1 pixel.