Wall mounting getting st ar ted – VTech VT 9162 User Manual
Page 9
9
WALL MOUNTING
GETTING ST
AR
TED
The Wall Mount bracket is designed for use on standard Wall Mount plates only.
1.
Line up the tabs on the wall mount adaptor with the holes on the bottom of the Base Unit.
Snap the wall mount bracket firmly in place.
2. Plug the AC adaptor into an electrical outlet, and the DC connector to the bottom of theBase
Unit. If the Handset battery pack has not been charged previously, place the Handset in the
Base Unit cradle, and allow it to charge for 16 hours.
3.
Connect the telephone line cord to the jack on the bottom of the Base Unit, and the other
and to the wall jack.
4. Mount the Base Unit on the wall. Position the Base Unit so the mounting stubs will fit into
the holes on the wall mount bracket. Sllde Base Unit down on the mounting stubs until it
locks into place.
wooden
stud
wallboard