VTech VT 9162 - Manual (Page 23)

23
Itad Operation
ANSWERING SYSTEM SETUP
Set Announce Only
CAUTION:
If you turn on the Announce Only option, your callers cannot leave a message .
1. Press MENU until "Set Announce Only" is announced.
2. Press SELECT until desired setting "ON" or "OFF" is declared.
3. Press TIME/SET to confirm, and the setting will be announced.
Note: You can store one OGM for Announce Only mode, and a separate OGM for Normal (accept
messages) mode. The appropriate OGM will be played based on how you set Announce Only.
Set Base Ringer On/Off
The Base ringer can be turned on or off.
1. Press MENU until you hear "Set Base
Ringer"
2. Press SELECT to toggle between the
choices (ON or OFF).
3. Press TIME/SET to confirm your sel-
ection. Voice prompt of "Base Ringer
is on" or "Base Ringer is off" will be
announced to confirm your setting.
Set Number of Rings
The Answering System has 4 ring type settings:
2 rings The incoming call is answered after 2 rings.
4 rings The incoming call is answered after 4 rings.
6 rings The incomng call is answered after 6 rings.
Toll Saver
The incoming call is answered after 2 rings only if there are new messages/memos present.
Otherwise, the call is answered after 4 rings. This may help you avoid long distance charges
when retrieving messages remotely.
1. Press MENU until you hear "Set number of rings."
2. Press SELECT until you hear the desired setting "2", "4", "6", or "Toll Saver".
3. Press TIME/SET to confirm your choice. The selected setting is then announced.