VTech VT 9162 - Manual (Page 8)

8
GETTING ST
AR
TED
SETTING UP YOUR VT9162
When fully charged, you will experience up to 5 hours of continuous talk, or up to 6 days of
standby (off the cradle, but not in use).
RINGER SELECTION
1. Press PROG/CHAN.
2. Press or until RINGER is displayed.
3. Press SELECT. The current selection will be dis-
played, and you will hear a sample of the selected
ring.
4. Press or to select a different ring style (there
are 4), or turn the ringer OFF.
5. Press SELECT to confirm your choice.
NOTE: If the ringer is set to OFF, the display will
show “RINGER OFF” in idle mode.
TONE/PULSE SELECTION
NOTE: Your VT 9162 is factory-preset for TONE
dialing.
1. To change dialing mode, press PROG/CHAN,
2. Press or until DIAL MODE is displayed.
3. Press SELECT. The current setting is displayed.
4. Press or to change the setting.
5. Press SELECT to confirm your choice.
ANSWERING SYSTEM - INTRODUCTION
Your VT9162 includes a digital answering system in
the Base Unit. Setup of the answering system is
easy. Step by step instructions can be found in the
section entitled
Answering System Setup, later on
in this user’s manual.