Victorinox CHRONOGRAPHS Watch - Manual (Page 43)

- 42 -
Setting the Day/Date
A. First turn the crown (in position 1) away from you approximately
ten times to activate the automatic movement if the watch is not
already wound. The sweep second hand will be moving.
B. Pull the crown out into position 3 (completely out). Set the correct
time by moving the hands clockwise. When you reach 12 PM,
the calendar date will jump and then set the correct time. Push
the crown back to position 1.
C. Set the crown in position 2 (intermediate position). Adjust the
date by turning the crown away from you.
D. If your watch is equipped with a day calendar, turn the crown
toward you to adjust the day setting. Then set the crown back to
position 1 and your watch is adjusted