Victorinox CHRONOGRAPHS Watch - Manual (Page 22)

- 21 -
measurement by reverting the 1/10th hand to zero and “flying back”
to the elapsed time.
D. Press Pusher B again to read the second split time.
E. Repeat this procedure until the action to be timed has been completed.
F. Press Pusher A to stop timing. NOTE: Timing will be indicated within
1/10th of a second on appropriate sub-dial.
G. Once the timing operation has been stopped, press Pusher B briefly
until the hands revert to the original position. The chronograph and
totalizer hands will be reset to zero.