Vivotek NETWORK CAMERA IZ7151 - Manual (Page 98)

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
- User's Manual
rtsp:///_accessname>
“m” is the stream number�
For detailed streaming protocol, please refer to “control signaling” and “data format” documents�
Camera Control
Note: This request requires privilege of viewer
Method: GET/POST
Syntax:
http:///cgi-bin/viewer/camctrl.cgi?[channel=][&camid=][&move=][&focus=
][&iris=][&speedpan=][&speedtilt=][&speedzoom=] [&speedapp=
>][&auto=][&zoom=][&speedlink=][&return=]
Parameter Value Description
channel
<0~(n-1)>
Channel of video source
camid
0,
Camera ID
move
home Move to camera to home position
up Move the Network Camera up
down Move the Network Camera down
left Move the Network Camera left
right Move the Network Camera down
speedpan -5 ~ 5 Set the pan speed
speedtilt -5 ~ 5 Set the tilt speed
speedzoom -5 ~ 5 Set the zoom speed
speedapp -5 ~ 5 Set the auto pan/patrol speed
auto
pan Auto pan
patrol Auto patrol
stop Stop camera
zoom
wide To zoom for larger view with current speed
tele To zoom for farer view with current speed
focus
far To focus on farer distance
near To focus on nearer distance
iris
auto Let the Network Camera control iris size
open Manually control the iris for bigger size
close Manually control the iris for smaller size
speedlink 0 ~ 4 Issue speed link command�
return
Redirect to the page after the parameter
is assigned. The can be a full URL path
or relative path according to the current path� If you omit
this parameter, it will redirect to an empty page�
Recall
Note: This request requires privilege of viewer
Method: GET
Syntax:
http:///cgi-bin/viewer/recall.cgi?recall=[&channel=][&return=]
Parameter Value Description
recall
Text string less than 30
characters
One of the present positions to recall�