Vivotek NETWORK CAMERA IZ7151 - Manual (Page 74)

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
7 - User's Manual
Request:
http://192.168.0.123/cgi-bin/admin/getparam.cgi?network_ipaddress
Response:
HTTP/1�0 200 OK\r\n
Content-Type: text/html\r\n
Context-Length: 33\r\n
\r\n
network.ipaddress=192.168.0.123\r\n
Set server parameter values
Note: The access right depends on the URL directory�
Method: GET/POST
Syntax:
http:///cgi-bin/anonymous/setparam.cgi? = [&=…
][&update=][&return=]
http:///cgi-bin/viewer/setparam.cgi? = [&=…
][&update=] [&return=]
http:///cgi-bin/operator/setparam.cgi? = [&=…
][&update=] [&return=]
http:///cgi-bin/admin/setparam.cgi? = [&=…
][&update=] [&return=]
Parameter Value Description
_
value to assigned
Assign to the parameter _
update
Set to 1 to actually update all fields (no need to use
update parameter in each group)
return
Redirect to the page after the parameter
is assigned. The can be a full URL path or
relative path according the current path� If you omit this
parameter, it will redirect to an empty page�
(note: The return page can be a general HTML file(�htm,
�html) or a VIVOTEK server script executable (�vspx)
file� It can not be a CGI command� It can not have any
extra parameters� This parameter must be put at end of
parameter list)
Return:
HTTP/1�0 200 OK\r\n
Content-Type: text/html\r\n
Context-Length: \r\n
\r\n
where is
=\r\n
[]
Only the parameters that you set and readable will be returned�
Example: Set the IP address of server to 192�168�0�123