Vivotek NETWORK CAMERA IZ7151 - Manual (Page 93)

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
User's Manual - 3
Syntax:
http:///cgi-bin/dido/setdo.cgi?do1=[&do2=][&do3=][&do4=][&return
=]
Where state is 0, 1� “0” means inactive or normal state while “1” means active or triggered state�
Parameter Value Description
do
0
1
0 => inactive, normal state
1 => active, triggered state
return
Redirect to the page after the parameter
is assigned. The can be a full URL path or
relative path according the current path� If you omit this
parameter, it will redirect to an empty page�
Example: Drive the digital output 1 to triggered state and redirect to an empty page
http://myserver/cgi-bin/dido/setdo.cgi?do1=1
Query status of the digital input
Note: This request requires the privilege of viewer�
Method: GET/POST
Syntax:
http:///cgi-bin/dido/getdi.cgi?[di0][&di1][&di2][&di3]
If no parameter is specified, all the status of digital input will be returned�
Return:
HTTP/1�0 200 OK\r\n
Content-Type: text/plain\r\n
Content-Length: \r\n
\r\n
[di0=]\r\n
[di1=]\r\n
[di2=]\r\n
[di3=]\r\n
where can be 0 or 1.
Example: Query the status of digital input 1
Request:
http://myserver/cgi-bin/dido/getdi.cgi?di1
Response:
HTTP/1�0 200 OK\r\n
Content-Type: text/plain\r\n
Content-Length: 7\r\n
\r\n
di1=1\r\n
Query status of the digital output
Note: This request requires the privilege of viewer�
Method: GET/POST
Syntax: