VXI BlueParrott B100 - Manual (Page 6)

Blue Parrott B100 Wireless Headset
PRODUCT FEATURES
Blue Parrott B100 Headset
5
Multifunction Button
Indicator Lights
Volume (Increase) / Microphone Mute Control
Volume (Decrease) Control
Noise Canceling Microphone
Adjustable Headband
T-Bar
Blue Parrott B100 Wireless Headset
USA FCC Part 15
FCC Notice to Users/Product Statements
This device complies with part 15 of the FCC rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device
must accept any interference received, including interference that may
cause undesired operation.
Users are not permitted to make changes or modify the device in any
way. Changes or modifications not approved by VXI Corporation will void
the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
The user must place the base at least 8” (20cm) or more from any
personnel and must not be co-loaded or operating in conjunction with
any other antenna or transmitter in order to comply with FCC RF
exposure requirements.
USA FCC Part 68
FCC Notice to Users/Product Statements
1. This equipment complies with Part 68 of the FCC rules and the
requirements adopted by the ACTA. On the bottom of the base of this
equipment is a label that contains, among other information, a
product identifier in the format US:AAAEQ##TXXXX. If requested, this
number must be provided to the telephone company.
2. If this device is malfunctioning, it may also be causing harm to the
telephone network. The device should then be disconnected until the
source of the problem can be determined and until repair has been
made. If this is done, the telephone company will notify you in
advance that temporary discontinuance of service may be required.
But if advance notice is not practical, the telephone company will
notify the customer as soon as possible. Also, you will be advised of
your right to file a complaint with the FCC if you believe it is
necessary.
3. The Universal Service Order Codes (USOC) for both the Line port and
Phone port beneath the base is RJ-11C. The Facility Interface Code
(FIC) is 02LS2. Finally 9.0F is the Service Order Code (SOC).
4. The telephone company may make changes in its facilities,
equipment, operations and/or procedures that may affect the
operation of this equipment. If this happens, the telephone company
will provide advanced notice in order for you to take the necessary
steps to maintain uninterrupted service.
5. If the telephone company requests information on what equipment is
connected to their lines, inform them of:
(a) The telephone number that this unit is connected to.
(b) The FCC Registration number located on the label.
6. A plug and jack used to connect this equipment to the premises
wiring and telephone network must comply with the applicable FCC
Part 68 rules and requirements adopted by the ACTA. A compliant
telephone cord and modular plug is provided with this product. It is
designed to be connected to a compatible modular jack that is also
compliant. See installation instructions for details.
7. The REN is used to determine the number of devices that may be
connected to a telephone line. Excessive RENs on a telephone line
may result in the devices not ringing in response to an incoming call.
In most but not all areas, the sum of RENs should not exceed five
(5.0). To be certain of the number of devices that may be connected
to a line, as determined by the total RENs, contact the local telephone
company. For products approved after July 23, 2001, the REN for this
product is part of the product identifier that has the format
US:AAAEQ##TXXXX. The digits represented by ## are the REN without
a decimal point (e.g., 03 is a REN of 0.3). For earlier products, the
REN is separately shown on the label.
8. If trouble is experienced with this Blue Parrott B100 system, for repair
or warranty information, please contact VXI Corporation at 1-800-
742-8588 or via the website at www.blueparrott.com. If the
equipment is causing harm to the telephone network, the telephone
22