Vivotek PZ7112 - Manual (Page 110)

VIVOTEK
110 - User's Manual
enable 0, 1 6/6 Enable or disable this event.
priority 0, 1, 2 6/6 Indicate the priority of this event:
“0” = low priority
“1” = normal priority
“2” = high priority
delay 1~999 6/6 Delay in seconds before detecting the next event.
trigger boot,
di,
motion,
seq,
recnotify,
6/6 Indicate the trigger condition:
“boot” = System boot
“di”= Digital input
“motion” = Video motion detection
“seq” = Periodic condition
“recnotify” = Recording notification.
di 6/6 Indicate which DI detects.
This field is required when trigger condition is “di”.
One bit represents one digital input. The LSB indicates DI 0.
mdwin 6/6 Indicate which motion detection windows detect.
This field is required when trigger condition is “md”.
One bit represents one window.
The LSB indicates the 1 st window.
For example, to detect the 1 st and 3 rd windows, set mdwin as 5.
inter 1~999 6/6 Interval of snapshots in minutes.
This field is used when trigger condition is “seq”.
weekday 6/6 Indicate which weekday is scheduled.
One bit represents one weekday.
bit0 (LSB) = Saturday
bit1 = Friday
bit2 = Thursday
bit3 = Wednesday
bit4 = Tuesday
bit5 = Monday
bit6 = Sunday
For example, to detect events on Friday and Sunday, set
weekday as 66.
begintime hh:mm 6/6 Begin time of the weekly schedule.
endtime hh:mm 6/6 End time of the weekly schedule.
(00:00 ~ 24:00 sets schedule as always on)
action_do_i<0~(ndo-1)>_e
nable
0, 1 6/6 Enable or disable trigger digital output.
action_do_i<0~(ndo-1)>_d
uration
1~999 6/6 Duration of the digital output trigger in seconds.