Varec Driver Entry Terminal 8620 User Manual
Page 25

8620 Driver Entry Terminal
Varec, Inc.
17
Variables
Description
Values
Value Notes
HostInterfaceType
Sets the Host Interface to either
Serial or Network
Network
Serial
Default
TouchScreen
Configures DET Software for
Touchscreen Interface (Currently
Touchscreen Not Supported)
TRUE
FALSE
Default
Watchdog
Enables Watchdog Feature
(Currently Not Supported DO NOT
Enable)
TRUE
FALSE Default
HostInterface Name
If HostInterfaceType is set to
Serial, this parameter sets the
ComPort.
Com 1
Com 2
Com 3
Com 4
RS232
RS485/RS232
RS232
RS232
BaudRate
Sets the Serial Baud Rate
4800
9600
19200
Default
Parity
Sets the Serial Parity
None
Even
Odd
Default
DataBits
Sets the Serial Data Bits
8
Default
StopBits
Sets the Serial Stop Bits
one
Default
Address
Sets the Serial Address. If using
more than one DET on an RS-485
loop, then each must have a
unique address.
1
HostNetworkInterface Port
If HostinterfaceType is set to
Network, this parameter sets the
Network Port.
4096
CardReaderSerial InterfaceEnabled
This parameter enables or
disables the Card Reader.
TRUE
FALSE
Name
If CardReadSerialInterface is
Enabled, this parameter sets the
ComPort.
Com 1
Com 3
Com 4
BaudRate
Sets the Card Reader Baud Rate
4800
9600
19200
Default
Parity
Sets the Card Reader Parity
None
Odd
Even
Default
DataBits
Sets the Card Reader Data Bits
8
Default
StopBits
Sets the Card Reader Stop Bits
1
Default
Table 4-2:
Variables Used in the DET.Config File