Visioneer OneTouch 7400 - Manual (Page 103)

98 V ISIONEER O NE T OUCH 7400 USB S CANNER I NSTALLATION G UIDE
C
REATE A
S
CANNING
P
ROFILE
You cannot change the settings of the preset profiles in the Advanced
Interface. However you can create new profiles and save them for future
use.
To create a new profile:
1. On the Advanced Interface, select one of the preset profiles, for
example, Black&White Configurations>Custom.
2. Adjust the settings as required then click the Save As button.
The Save Profile dialog box opens.
3. Type a name for the new profile and click OK. The name must be
at least two characters long.
Your new profile is added to the configuration list.
To change or delete a profile you created:
1. Select your profile from the configuration list.
2. Make changes to the profile as needed, and then click Save.
3. If you want to delete the selected profile, click Delete.