Verbatim MediaStation Network Multimedia Hard Drive User Manual
Page 16
16
① Turn on MediaStation and press [SETUP] in Mode Selection screen.
② Move to ‘Network’ icon and press [ENTER]. Setup box will be displayed under icon
menu.
③ Move to DHCP Off and press [ENTER].
④ Move to ‘IP Addr’ and press [ENTER]
IP address Input box will be displayed. Enter IP address with arrow and number button of
remote control. And then, press [ENTER] again.
⑤ Move to ‘Subnet’ and press [ENTER].
Subnet mask Input box will be displayed. Enter Subnet mask with arrow and number
button of remote control. And then, press [ENTER] again.
⑥ Finally, press [SETUP] again for saving configurations.
✓
Check ‘IP address obtained automatically’
When you use ‘DHCP On’, you can see the IP address in MENU screen after selecting
‘PC-Network] icon in Mode Selection screen.
✓ Check ‘The specifi c IP address you wrote’
When you use ‘DHCP off’, you can see the IP address in MENU screen after selecting
‘PC-Network] icon in Mode Selection screen.