VIEWSONIC VS11857 - Manual (Page 11)

ViewSonic CD3200 8
C
ONNECTING
Observe the following instructions to connect your LCD display properly:
P
OWER
S
UPPLY
• Do not open the power supply housing. An open housing
presents a lethal hazard from electrical shock. There are no
parts inside to be cleaned or serviced.
• Operate your LCD display only with grounded outlets with AC 100-240V~/
50-60 Hz. If you are not sure about the power supply at your location, check
with your power company.
• Use only the power supply and power connection cable provided.
• For additional safety we recommend use of a surge protector to protect
your LCD display from damage resulting from voltage surges or lightning.
• To remove the LCD display from the power supply, disconnect the plug
from the AC outlet.
• The power outlet must be in the vicinity of your LCD display and within
reach of the power cables. DO NOT stretch the power cables tightly
to reach a power outlet.
• You should arrange the LCD display cables in a manner that no one can
trip over or step on them.
• To avoid damage of cable do not place any objects or furniture on
the cable.