Vivotek SD7151 - Manual (Page 92)

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
92 - User's Manual
Post data:
fimage=<file name>[&return=]\r\n
\r\n
Server will accept the upload file named to be upgraded the firmware and return with
if indicated.
Camera Control
Note: This request requires privilege of viewer
Method: GET/POST
Syntax:
http:///cgi-bin/viewer/camctrl.cgi?[channel=][&camid=][&move=]
[&focus=][&iris=][&speedpan=][&speedtilt=][&speedzoom=]
[&speedapp=][&auto=][&zoom=][&speedlink=][&return=]
Parameter Value Description
channel <0~(n-1)> Channel of video source
camid 0, Camera ID
move
home Move the Network Camera to home position
up Move the Network Camera up
down Move the Network Camera down
left Move the Network Camera left
right Move the Network Camera right
speedpan -5 ~ 5 Set the pan speed
speedtilt -5 ~ 5 Set the tilt speed
speedzoom -5 ~ 5 Set the zoom speed
speedapp 1 ~ 5 Set the auto pan/patrol speed
auto
pan Auto pan
patrol Auto patrol
stop Stop camera
zoom
wide To zoom for larger view with current speed
tele To zoom for farer view with current speed
sethome
define Set current position as home position
default Using default home position
calibrate go Recalibrate the home position to the default center
return
Redirect to the page after the parameter
is assigned. The can be a full URL path or
relative path according to the current path. If you omit this
parameter, it will redirect to an empty page.