Accessories, Remote control – Venturer VPF810DL-CHER User Manual
Page 5
- 5 -
ACCESSORIES
AC Power Adapter .................................................................................... x 1
Remote Control ......................................................................................... x 1
Please check and identify the supplied accessories.
• To order accessories visit web site (http://www.1800customersupport.com/V7)
Using the Remote Control
•
Point the remote control at the REMOTE SENSOR located on the unit.
•
When there is a strong ambient light source, the performance of the infrared
REMOTE SENSOR may be degraded, causing unreliable operation.
•
The recommended effective distance for remote operation is about 16 feet (5
meters).
Remove the plastic sheet before using the remote control.
TO CHANGE REMOTE BATTERY
1. Open the battery door.
2. Insert one CR2025 (3V) size battery.
WARNING:
Do not dispose of the battery in a
fire. It may leak and/or explode.
CAUTION:
Danger of explosion if battery is
incorrectly replaced. Replace only
with the same or equivalent type.
BATTERY REPLACEMENT
When the battery becomes weak, the operating distance of the remote control will
be greatly reduced and you will need to replace the battery.
NOTE:
•
If the remote control is not going to be used for a long time, remove the battery
to avoid damage caused by battery leakage corrosion.
REMOTE CONTROL
PLACEMENT
rear of the unit