Safety precautions – Venturer VPF810DL-CHER User Manual
Page 2
- 2 -
SAFETY PRECAUTIONS
The exclamation point within the
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in this owner's manual.
The lightning flash with an arrowhead
symbol, within the equilateral triangle,
is intended to alert the user to the
presence of uninsulated "dangerous voltage" within
the product's enclosure that may be of sufficient
magnitude to cause an electric shock.
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-
SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.
On Placement
• Do not use the unit in places that are extremely hot, cold, dusty or humid.
• Do not restrict the airflow of the unit by placing it in a place with poor airflow, by covering it with
a cloth, or by placing it on carpeting.
• Keep the stand of the unit clear from cables. Cables could pull the unit to the floor.
• The unit should not be exposed to excessive heat such as sunshine, fire or the like.
On Safety
• When connecting or disconnecting the AC power adapter, grip the plug and not the cord itself.
Pulling the cord may damage it and create a hazard.
• When you are not going to use the unit for a long period, disconnect the AC power adapter.
Temperature and Humidity Limitations
• Operating temperature: 0°C ~ 45°C (32°F ~ 113°F)
• Humidity: 20% ~ 80%
Rating Plate Location
• The rating plate is located on the back of the unit.
WARNING
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE. DO NOT PLACE OBJECTS FILLED WITH LIQUIDS ON OR NEAR THIS
UNIT.
WARNING: Should any trouble occur, disconnect the AC power adapter and refer
servicing to a qualified technician.
Stop the unit before connecting or disconnecting a memory card or USB flash drive.
Do NOT connect or disconnect external equipment when the unit is playing, coping or
deleting files.
“ ” may appear on the screen during operation. A “
” means that the desired operation
is not permitted by the unit.